Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 172 / 298

11-12 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
11
11.4.1 Modifying the Active Configuration
Note – Only one operator can make changes in a particular system at a
particular time. If you attempt to modify a resource in a system that is being
modified by another operator, an error is generated.
▼
To modify a resource in the active configuration:
1. Expand the elements of the resource tree until the resource that you want
to modify is displayed.
2. Select the resource(s) that you want to modify.
For information on selecting multiple resources, refer to Section 2.5,
“Selecting Items,” on page 2-10. Note that if you select multiple resources,
you will not be able to modify parameters that apply differently to each of
the selected resources.
3. Select Edit
→
Modify to display the appropriate Modify dialog box.
4. Make the appropriate changes in the Modify dialog box.
Note – Observe the following restrictions:
You cannot modify the name of an existing resource in the active configuration.
If you want to modify the name of a resource, you must delete the existing
resource and create a new one with the new name. You can, however, change
the name of a resource that has been added but has not yet been saved.
If you selected multiple resources, parameters that cannot be modified are
grayed out.
5. To accept the settings, click OK. To exit the dialog box without accepting
the settings, click Cancel. To return to the default settings, click Reset.