Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 193 / 298

Troubleshooting 12-15
12
Table 12-2 RTM Table MIB Variables (1 of 2)
MIB Variable Description
luRTMActive Indicates whether NetView has activated RTM for this
3270. The value can be Yes or No.
luRTMSendOnOv Indicates whether the Sun PU2.1 SNA Server will send
RTM statistics if any of its counters overflow. The value
can be Yes or No.
luRTMSendOnTerm Indicates whether the Sun PU2.1 SNA Server will send
RTM statistics when the LU-LU session is unbound. The
value can be Yes or No.
luRTMType The RTM collection type. The type can be one of the
following:
Stop on First Char
- The time from the transmission of the
inbound AID request to the receipt of the first character of
the next outbound message.
Stop on Kbd Unlock
- The time from the transmission of
the inbound AID request to the receipt of the next Change
Direction indicator, End Bracket indicator, or keyboard
restore request.
Stop on CDI/EBI
- The time from the transmission of the
inbound AID request to the receipt of the next Change
Direction or End Bracket indicator.
Stop on Last Char
- The time from the transmission of the
inbound AID request to the receipt of the last character of
the next outbound message.
luRTMNumBounds The number of RTM boundaries (or counters) requested.
The value can be 1, 2, 3, or 4.
luRTMBoundary[1-4] For each boundary, the upper limit of the response time
range (in milliseconds).
luRTMCount[1-4] For each boundary, the number of times a measured
response time fell into its response time range.
luRTMOverFlow The number of times a measured response time was
outside the upper limits of any of the counters.
luRTMTotalTime The total accumulated time (in milliseconds).
luRTMLastTime The last measured response time (in milliseconds).