Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 136 / 298

9-4 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
9
Network Qual Name
The network-qualified (fully-qualified) name of the independent LU. The name
consists of two identifiers, an ID and a name, with a period used as a field
separator. Each field can contain up to eight alphanumeric characters
(including @, #, and $). Tabs and spaces are not allowed. The first character
cannot be a number. Lowercase letters are converted to uppercase.
By default, the software uses the netid of the PU2.1 server CP Name parameter
for the ID (refer to Section 5.1, “Basic PU2.1 Server Configuration,” on
page 5-2) and the local independent LU name for the name.
Session Limit
The maximum number of sessions supported by the independent LU. The
value can range from 1 to 1 024.
Allow Partner LU to Queue BIND Rsp?
Indicates whether the local independent LU allows the partner LU to queue
bind requests if the session cannot be activated. Check the box if you want the
partner LU to queue bind requests. Clear the box if you do not want the
partner LU to queue bind requests.
Sync Level SYNCPT Supported?
Indicates whether the local independent LU supports conversations of sync
level sync point (SYNCPT). Check the box if the LU supports SYNCPT. Clear
the box if the LU does not support SYNCPT.
Note – The independent LU cannot support sync point on its own. However,
the LU can allow sync point flows (PS Headers) to pass through and then
recognize and return sync point recovery GDS variables to an external sync
point manager.
9.2 Configuring a Partner LU
Note – Before you can configure a partner LU, you must configure either a
local dependent LU or a local independent LU.
▼
To configure a partner LU:
1. Double-click the PU2.1 server name to open its subordinate entries.