Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 156 / 298

10-6 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
10
Note – The setting of this parameter overrides the equivalent setting in the
dependent LU configuration. For more information, refer to Section 8.1.2,
“Advanced Dependent LU Configuration,” on page 8-6.
PU2.1 Keepalive Timer
The time interval (in minutes) at which the Sun PU2.1 SNA Server sends a
keep-alive signal to the client. The server continues to send signals at the
specified time interval until the client sends a response back to the server or
until the number of retries specified by the PU2.1 Keepalive Retries parameter
is exhausted.
This parameter is used with the PU2.1 Keepalive Retries parameter to detect
failed client applications and/or workstations. Note that the setting of this
parameter overrides the equivalent setting in the dependent LU configuration.
For more information, refer to Section 8.1.2, “Advanced Dependent LU
Configuration,” on page 8-6.
PU2.1 Keepalive Retries
The number of times the Sun PU2.1 SNA Server continues to send keep-alive
signals to the client if the client does not send a response back to the server. If
the number of retries is exhausted before the client responds, the LU is freed
and becomes available for another client connection.
This parameter is used with the PU2.1 Keepalive Timer parameter to detect
failed client applications and/or workstations. Note that the setting of this
parameter overrides the equivalent setting in the dependent LU configuration.
For more information, refer to Section 8.1.2, “Advanced Dependent LU
Configuration,” on page 8-6.
In-Session Idle Timeout
The idle time-out period for connections between the client and the host
application (in minutes). If no traffic is detected during the specified time
period, the Sun PU2.1 SNA Server releases the client connection and the active
LU session, and the LU becomes available for another client connection.
Note – The setting of this parameter overrides the equivalent setting in the
dependent LU configuration. For more information, refer to Section 8.1.2,
“Advanced Dependent LU Configuration,” on page 8-6.