Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 70 / 298

3-4 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
3
3.3 Starting the SunGMI
To start the SunGMI, enter the
sungmi
command at the shell prompt. The
SunGMI is linked to the
/usr/bin
directory (unless a different directory is
chosen during installation) and should be in your path in most environments.
For general information on how to use the SunGMI, refer to Chapter 2, “Using
the Administration Program."
3.4 Creating a Configuration
After you start the SunGMI and connect to a domain, the screen displays the
configuration window. The Sun PU2.1 SNA Server is installed with a
configuration called
config1
. The following sections describe how to create a
manager system; how to configure a system, a PU2.1 server, a connection, a
PU, and a dependent LU for
config1
; and how to save the configuration.
3.4.1 Creating a Manager System
▼
To create a manager system:
1. Highlight
config1
in the configuration window, and then select
File
→
Open from the menu bar to display the resource window for
config1
.
2. Select Window
→
Managers List to display the list of the manager systems
that are defined for
config1
.
3. Select Edit
→
New Manager from the menu bar to display the Create
Manager dialog box.