Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 182 / 298

12-4 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
12
Note – For large configurations, refreshing tables can be time-consuming and
system-intensive. Make sure that you specify a Poll Interval that does not
interfere with system operations.
MIB Variables
The Management Information Base (MIB) variables supported for the specified
resource. The list of MIB variables includes both configuration variables, status
variables, and RTM variables, as follows:
• Configuration variables - Used for the Configuration table format. The
configuration variables correspond to the parameters that you set for the
specified resource when you configure your manager system. For
example, the systemName variable corresponds to the Host parameter in
the Create System dialog box.
• Status variables - Used for the status table format. For more information
about the status variables, refer to Table 12-1 on page 12-5.
• RTM variables
- Used for the RTM table format. For more information
about the RTM variables, refer to Table 12-2 on page 12-15.
To include an MIB variable in your table format, select the variable and click
Add. The variable is displayed in the Sample box. Note that the variables are
displayed in the order in which you add them.
To remove an MIB variable from your table format, select the variable in the
Sample box and click Remove.
Heading
For the selected MIB variable, the heading to use in the table. Sun recommends
that you use heading names that are simpler and shorter than the MIB variable
names.
Column Width
The width of the table column in which the selected MIB variable is displayed.
3. To accept the settings, click Done.
12.1.1.3 Using the Status Tables
If a status table format is defined for a resource, you can display a status table
for the resource or subordinate resources by highlighting the top-level resource
in the resource tree and selecting Display
→
Status . For example, if you select
a server, the software displays information about all the servers configured on
the system. If you select a LAN connection, the software displays information