Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 199 / 298

Troubleshooting 12-21
12
4. To accept the settings and start the line trace, click Start. To exit a dialog
box without accepting the settings, click Cancel.
Note – If the remote authentication fails, the screen displays the message
“Permission Denied” in the trace window. Make sure that you have configured
your system appropriately for line tracing. For more information, refer to
Section 12.1.3.1, “Configuring Your Systems for Line Tracing,” on page 12-17.
12.1.3.3 Reading the Output
The Sunscope utility output resembles a hexadecimal dump. Each frame is
prefixed by
S
(for Sent frames) or
R
(for Received frames). The frame is
displayed in both hexadecimal (HEX) format and in ASCII format (or EBCDIC
format if the
-e
command line option is specified). Only printable ASCII data
is shown.
The following sections show examples of SDLC and Token Ring output.
Sample SDLC Output
The following is a sample of SDLC output.
Table 12-4
xterm
Command Line Options
Command Line
Options
Description
-j Jump scroll.
-sb Enable scroll bars.
-sl number Save the last number lines of output. For
example, to save the last 1,000 lines of
output, enter -sl 1000.
-geometry columnxline Create a window that is column columns
wide and line lines high. For example, to
create an 80-column by 48-line window,
enter -geometry 80x48.