Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 74 / 298

3-8 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
3
5. In the Line Name field, enter the name for the new line. The name can
contain up to eight alphanumeric characters (including @, #, and $). Tabs
and spaces are not allowed. The first character cannot be a number. The
name cannot be the same as any other connection name.
6. In the Type field, select Token Ring, Ethernet, or FDDI, as appropriate.
Note that Ethernet and FDDI are not supported on all platforms.
7. In the MAC Address field, enter the Medium Access Control (MAC)
address for the local station. See your host network administrator for the
correct value.
8. If you are running on a 16 Mb/s Token Ring, click Advanced, tab to the
LAN Speed field, and select 16 Mb/s.
9. Typically, you can leave the default settings for the remaining parameters
in the Basic and Advanced dialog boxes. If you want to change any of the
other parameters, refer to Section 6.1, “Adding a LAN Connection,” on
page 6-1.
10. Click OK to add the new LAN connection.
▼
To add an SDLC connection:
1. Double-click PU2.1 Servers in the resource tree to display the name of the
PU2.1 server you just added.
2. Double-click the PU2.1 server name to open its subordinate entries.
3. Click SDLC Lines in the resource tree.
4. From the main window, select Edit
→
New
→
SDLC Line to display the
Create SDLC Line dialog box.