Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 145 / 298

Configuring for LUType 6.2 9-13
9
parameter is disabled for the PU2.1 server, you must specify a password here.
For information, refer to Section 5.1, “Basic PU2.1 Server Configuration,” on
page 5-2.
Profile List
The names of the profiles to be used for conversation-level security
verification. You can specify up to 16 profile entries for each LUType 6.2 user.
Separate each profile name with a comma. Each profile entry can contain up to
10 alphanumeric characters. Tabs and spaces are not allowed.
Local LU
The name of the local LUType 6.2 with which the partner LU is paired. Select
Any if the LUType 6.2 user can access more than one independent LU and/or
dependent LU.
5. To accept the settings, click OK. To exit a dialog box without accepting the
settings, click Cancel. To return to the default settings, click Reset.
9.5 Configuring a Transaction Program
▼
To configure a transaction program:
1. Double-click the PU2.1 server name to open its subordinate entries.
2. Click Transaction Programs in the resource tree to select it.
3. From the main window, select Edit
→
New
→
Transaction Program to
display the Create Transaction Program dialog box.
4. Enter the appropriate information in the Basic dialog box and then click
Advanced to display the Advanced dialog box. The following sections
describe the parameters in the Basic and Advanced dialog boxes.
5. To accept the settings, click OK. To exit a dialog box without accepting the
settings, click Cancel. To return to the default settings, click Reset.
9.5.1 Basic Transaction Program Configuration
This section describes the fields on the Create Transaction Program dialog box.