Sun Microsystems SunLink SNA 9.1 PU2.1, Руководство по настройке

Страница: 138 / 298

9-6 SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
9
9.2.2 Advanced Partner LU Configuration
Network Qual Name
The network-qualified (fully-qualified) name of the partner LU. The name
consists of two identifiers, an ID and a name, with a period used as a field
separator. Each field can contain up to eight alphanumeric characters
(including @, #, and $). Tabs and spaces are not allowed. The first character
cannot be a number. Lowercase letters are converted to uppercase.
By default, the software uses the netid of the PU2.1 server CP Name parameter
for the ID (refer to Section 5.1, “Basic PU2.1 Server Configuration,” on
page 5-2) and the partner LU name for the name.
Uninterpreted Name
A name that identifies the partner LU to the System Services Control Point
(SSCP). The name can contain up to eight alphanumeric characters (including
@, #, and $). Tabs and spaces are not allowed. The first character cannot be a
number. Lowercase letters are converted to uppercase. The default
Uninterpreted Name is the partner LU name.
Note – This parameter applies only to dependent LU sessions on the INIT-
SELF and TERM-SELF.