Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 82 / 168

4-28 Sun Fire X4140 Server Service Manual • September 2010
3. Watch the output from the command and respond to the confirmation prompts
for continuing the update and rebooting the server:
Servicetool is going to collect system information for the service
processor for future part swaps.
The following preconditions must be true for this to work:
* The new service processor must be installed.
Do you want to continue (y|n)? y
Service processor FRU information ready to be collected.
You MUST reboot the service processor for to complete
this process. Allow the service processor to fully boot.
DO NOT UNPLUG THE SYSTEM WHILE THE SERVICE PROCESSOR IS BOOTING!
Would you like to reboot the service processor now (y|n)? y
The system is going down NOW!!
Sending SIGTERM to all processes.
4.7.2 Restoring Product Information From the FRUID
PROM
1. In Escalation mode in ILOM, view product information on the FRUID PROM
that is on the Power Distribution Board (PDB) by issuing this command:
# frutool -t pb --read_cmm_product_area
product part_number 594-5133-03
product serial_number 0829QAS003
product asset_tag NULL:16
chassis serial_number 0226LHF-0822B402YH
chassis part_number 540-7618-XX
2. Save the entire motherboard FRUID image, in case it later needs to be restored
to its original state:
# frutool -r mb > /persist/mb.bin
3. Copy the product information from the PDB to a file:
# frutool -t pb --read_cmm_product_area >
/dev/shm/product.info
4. View the file by issuing the following command to verify the previous step was
successful:
# cat /dev/shm/product.info
5. Write the product information to the motherboard by issuing this command:
# frutool -t mb --write_cmm_product_area <
/dev/shm/product.info