Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 26 / 168

2-2 Sun Fire X4140 Server Service Manual • September 2010
For your protection, observe the following safety precautions when setting up your
equipment:
■
Follow all Sun cautions, warnings, and instructions marked on the equipment and
described in
Important Safety Information for Sun Hardware Systems (816-7190).
■
Follow all cautions, warnings, and instructions marked on the equipment and
described in the
Sun Fire X4140 Server Safety and Compliance Guide .
■
Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
■
Follow the electrostatic discharge safety practices as described in this chapter.
2.2 Required Tools
The Sun Fire X4140 Server can be serviced with the following tools:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
No. 3 Phillips screwdriver
■
No. 1 flat-blade screwdriver (for battery removal)
■
Stylus or pencil (to power on server)
2.3 Obtaining the Chassis Serial Number
To obtain support for your server, you need your chassis serial number. The chassis
serial number is located on a label on the front of the server, and another label on the
top of the server.
The chassis serial number can be obtained by using IPMItool. See Sun Server CLI Tools
and IPMItool User’s Guide (821-0997).
FIGURE 2-1
Chassis Serial Number Label