Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 31 / 168

Chapter 2 Preparing to Service the System 2-7
To remove a server from the rack:
1. Disconnect all cables and power cords from the server.
2. Extend the lower floor arm on the cabinet for safety, if present.
3. Extend the server to the maintenance position.
See Section 2.5, “Extending the Server to the Maintenance Position” on page 2-5 .
4. Press the metal lever that is located on the inner side of the rail to disconnect
the cable management arm (CMA) from the rail assembly (
FIGURE 2-4
).
The CMA is still attached to the cabinet, but the server chassis is now
disconnected from the CMA.
FIGURE 2-4
Metal Lever and Cable Management Arm
Caution – If necessary, use two people to dismount and carry the chassis.