Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 61 / 168

Chapter 4 Servicing Motherboard Components 4-7
FIGURE 4-3
Removing DDR2 DIMMs
6. Place the DDR2 DIMM on an antistatic mat.
7. Repeat
Step 4
through
Step 6
to remove any additional DDR2 DIMMs.
4.1.4 Installing DDR2 DIMMs
Caution –
Ensure that all power is removed from the server before removing or
installing DDR2 DIMMs, or damage to the DDR2 DIMMs might occur. You must
disconnect all power cables from the system before performing this procedure.
Tip –
See Section 4.1.2, “DDR2 DIMM Guidelines” on page 4-3 for information about
configuring the DDR2 DIMMs.
1. Unpackage the replacement DDR2 DIMMs and place them on an antistatic mat.
2. Ensure that the ejector tabs are in the open position.