Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 81 / 168

Chapter 4 Servicing Motherboard Components 4-27
Note – If your system is running ILOM 3.x, then you must re-enable your
SunService account.
Note –
Before beginning these procedures, obtain Service/Escalation passwords
from the Customer Support Center.
4.7.1 Updating FRU Product Information Using
ServiceTool
1. Use SSH to log into the SunService account. The default password is
changeme
.
# ssh
<SP IP address>
-l sunservice
# <SP IP Address>'s password: changeme
2. At the prompt, enter the
servicetool
command with options. The options are
defined in the table below.
# servicetool --fru_update=serviceprocessor
<OtherOptions>=
<value>
Option Description
--board_replaced=BOARD
Update FRU information for BOARD after it has
been replaced. BOARD represents one of the
following parameters:
• mainboard
• pdb
--fru_product_part_number
Write a new product part number to mainboard and
pdb FRUs.
--fru_product_serial_number
Write a new product serial number to mainboard
and pdb FRUs.
--fru_chassis_serial_number
Write a new chassis serial number to mainboard
and pdb FRUs.
--fru_chassis_part_number
Write a new chassis part number to mainboard
and pdb FRUs.
--fru_asset_tag
Write a new asset tag to mainboard and pdb
FRUs.