Sun Microsystems Sun Fire X4140, Руководство по обслуживанию

Страница: 54 / 168

3-18 Sun Fire X4140 Server Service Manual • September 2010
FIGURE 3-12
Installing a Power Supply
3. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
4. Close the CMA, inserting the end of the CMA into the rear left rail bracket
(
FIGURE 3-10
).
5. Verify that the following LEDs are not lit:
■
Failure LED on the replaced power supply
■
Service Required LED
■
Front Service Required LED
■
Rear Service Required LED
Note – See Section 1.3, “Sun Fire X4140 Server Front Panel Features” on page 1-8 and
Section 1.4, “Sun Fire X4140 Server Rear Panel Features” on page 1-9 for more
information about identifying and interpreting system LEDs.
6. Verify the status of the power supplies.
Solaris OS: At the
->
prompt, type the
showenvironment
command.