Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 93 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-23
5.3.7.2 Modifying a Volume
Use this command to modify a volume’s attributes on a specified Sun StorEdge 6020
array. The
sscs modify volume
command-line syntax is shown below.
TABLE 5-17
describes the arguments associated with the
modify volume
subcommand.
5.3.7.3 Deleting a Volume
Use this command to delete a volume on a specified Sun StorEdge 6020 array. The
sscs delete volume
command-line syntax is shown below.
-P,--permissions
none | readwrite |
readonly
Specifies the user access rights to this drive. The default
setting is none.
-n,--number
lun Specify the logical unit number lun of the volume.
volume
vol-name vol-name can be up to 80 characters long.
# sscs modify -a
array-name
-P { none | readwrite | readonly}
volume
vol-name
TABLE 5-17
sscs modify volume
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-P,--permissions
none | readwrite |
readonly
Specifies the user access rights to this drive. The default
setting is none.
volume
vol-name Specifies a vol-name up to 80 characters long.
# sscs delete -a
array-name
volume
vol-name
TABLE 5-16 sscs create volume
Command-Line Arguments
Argument Description