Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 141 / 176

Chapter 11 Servicing the Sun StorEdge Network FC Switch-16 Switches 11-3
11.3 Replacing a Sun StorEdge FC Switch
1. Reinsert the GBICs into the new switch in the same port numbers they occupied
on the removed switch.
Note –
Make certain you use the same ports you made a note of in Step 7 of
Section 11.2, “Removing a Sun StorEdge FC Switch” on page 11-2.
2. Identify and note the MAC address for the new switch and make a note of the
address.
The MAC address for the FC switch is a 12-digit number that is printed on the label
on the back of the FC switch.
3. Slide the switch into the Sun StorEdge 6320 system.
See
FIGURE 8-1
for the position of the switch.
4. Replace the screws that connect the switch to the front of the cabinet.
5. Replace the grill that covers the switch.
6. Close the front door.
7. Reconnect the power cable to the switch.
8. Connect all FC cables into the GBIC.
9. Power on the FC switch.
10. Close the service panel.
11. Close the back door.
12. Set the switch IP address using the RARP or another method as documented in
the Sun StorEdge network FC switch-16 documentation.