Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 64 / 176

3-10 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
The numbering scheme used to calculate the IP addresses depends on the Sun
StorEdge 6320 system ID number. If the Sun StorEdge 6320 system firewall is
10.0.0.n, the Storage Service Processor IP address is 10.0.0.n+8, and the IP address for
the Storage Service Processor accessory tray will be 10.0.0.n+1. The LAN IP
addresses for the first eight Sun StorEdge 6320 systems shipped to the same site are
listed in
TABLE 3-9
.
192.168.0.42
array02
Third Sun StorEdge 6020 arrays in first cabinet
192.168.0.43
array03
Fourth Sun StorEdge 6020 arrays in first cabinet
192.168.0.44
array04
Fifth Sun StorEdge 6020 arrays in first cabinet
192.168.0.50
array10
Lowest Sun StorEdge 6020 arrays in second cabinet
192.168.0.51
array11
Second Sun StorEdge 6020 arrays from bottom in
second cabinet
192.168.0.52
array12
Third Sun StorEdge 6020 arrays from bottom in second
cabinet
192.168.0.53
array13
Fourth Sun StorEdge 6020 arrays from bottom in
second cabinet
192.168.0.54
array14
Fifth Sun StorEdge 6020 arrays from bottom in second
cabinet
192.168.0.55
array15
Sixth Sun StorEdge 6020 arrays from bottom in second
cabinet
TABLE 3-9
Storage Service Processor LAN IP Addresses
IP Address Designator Description
10.0.0.242
new_firewall
Default factory address for the Sun StorEdge 6320
system firewall
10.0.0.243
new_ntc
Default factory address for the Network Terminal
Concentrator (NTC), which is inside the Storage
Service Processor accessory tray
10.0.0.250
new_sp new_sp.
Default factory address for the Storage Service
Processor
10.0.0.2
sp0-firewall
First Sun StorEdge 6320 system firewall
10.0.0.3
sp0-ntc
First Storage Service Processor accessory tray (NTC)
10.0.0.10
sp0 sp0.
First Storage Service Processor
10.0.0.12
sp1-firewall
Second Sun StorEdge 6320 system firewall
TABLE 3-8
IP Addressing Configurations (Continued)
IP Address Designator Description