Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 105 / 176

6-1
C H A P T E R
6
Fault Detection and Isolation
Overview
This chapter provides a brief overview of the functionality provided when using the
Storage Automated Diagnostic Environment 2.2 software to perform fault detection
and isolation on the Sun StorEdge 6320 systems.
For detailed instructions about configuring and using the Storage Automated
Diagnostic Environment, refer to the Storage Automated Diagnostic Environment User’s
Guide.
This chapter is organized as follows:
■
“Monitoring” on page 6-1
■
“Fault Detection” on page 6-2
■
“Fault Isolation” on page 6-4
■
“Security” on page 6-4
■
“Connecting to the Storage Automated Diagnostic Environment” on page 6-5
6.1 Monitoring
If the customer’s host is part of the configuration, the individual components are
monitored by the Storage Automated Diagnostic Environment through the out-of-
band paths connected directly to the host server. See the Storage Automated Diagnostic
Environment2.2 System Edition User’s Guide for additonal information.
Out-of-band refers to the connections and devices that are not in the data path. In this
case, the Storage Service Processor does not have access to the data that is stored on
the Sun StorEdge 6320 systems.