Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 83 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-13
5.3.2 Logging In and Out
The following commands enable you to log in to and out of
sscs
. Only users with
passwords on the Storage Service Processor can log in; see
TABLE 5-1
and
“Administering Users” on page 5-13.
5.3.2.1 Logging In
The
sscs login
command-line syntax is shown below.
TABLE 5-6
describes the arguments associated with the
login
subcommand:
5.3.2.2 Logging Out
● Type:
5.3.3 Administering Users
This section describes how to use the
sscs
commands for administering the
admin
,
storage
, and
guest
users. When the administrator assigns passwords to users,
users can perform functions according to their account privileges. See
TABLE 5-1
for
user account passwords. See
TABLE 5-4
for a description of the user accounts and
privileges.
# sscs login {-u
username
-h
hostname
} [-f] [-s]
TABLE 5-6
sscs login
Command-Line Arguments
Argument Description
-u, --username username Specifies the user name of
admin
,
storage
, or
guest
.
-h, --hostname hostname Specifies the host name of the Storage Service Processor.
-f, --force Forces a login to the Storage Service Processor if another user
with the same user name is already logged in.
-s, --https Log in using a secure HTTP connection.
# sscs logout