Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 151 / 176

Chapter 12 Servicing Sun StorEdge 6020 Arrays 12-9
3. Verify and fix the firmware revisions for the replacement array.
Select Manage
→
Service
→
Revision Maintenance and click Create Patch Report.
This verifies the Sun StorEdge 6020 array has the most recent patches applied.
Click Select Patches. Check to see if any of the patches are listed for the replacement
array. The list is presented with the names of the arrays and which patches are
needed. Select the patches that you want to apply. The Patch Installation Report
generates a log of the changes that have been applied.
Note –
The Revision Maintenance may require initial setup if this is the first time it
has been used on your Sun StorEdge 6320 system. This is done through the Revision
Setup portion of the Storage Automated Diagnostic Environment.
12.4 Adding a Disk to a Sun StorEdge 6020
Array
You can add from 1-to-7 drives at a time to a Sun StorEdge 6020 array. The only
caveat is that if you add less that the full compliment of 7 drives, you use you last
storage pool for the tray. That means you must backup and restore data when you
decide to add additional disks at a later date.