Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 153 / 176

Chapter 12 Servicing Sun StorEdge 6020 Arrays 12-11
2. Set the new Sun StorEdge 6020 array on a table and attach the side rails using the
eight screws.
3. Align the Sun StorEdge 6020 array’s rails with the rails inside the Sun StorEdge
6320 system and push the array into the cabinet.
4. Install the four screws that secure the array to the front of the Sun StorEdge 6320
system.
Note –
Use care when installing the screws as the weight of the array can cause the
screws to become cross threaded.
5. Attach the trim strips using the two screws on each side of the Sun StorEdge 6020
array.
6. Close the front door of the Sun StorEdge 6320 system.
7. Open the back door of the Sun StorEdge 6320 system.
8. Insert the four screws that secure the Sun StorEdge 6020 array to the side rails in
the back of the Sun StorEdge 6320 system.
9. Connect the two loop card cables on each side of the Sun StorEdge 6020 array.
10. Connect the Ethernet cable to the keepers.
11. Connect the Ethernet cable to the controller card if one is present in the array.
12. Connect the Fibre Channel cables.
13. Connect the power cables and turn on the power supply circuit breakers.
All LEDs on the back of the Sun StorEdge 6020 array will flash as the power on
self-tests are run by the unit. It will take 3-5 minutes for the Sun StorEdge 6020 array
to completely power up. Wait until it has completely powered up before proceeding.
14. Close the back door of the Sun StorEdge 6320 system.
15. On a server, bring up the Storage Automated Diagnostic Environment in your web
browser.
16. Enter the user name and password.
https://
hostname
:7443/
User Name: admin
Password: !admin