Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 112 / 176

7-2 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
7.2 Removing and Replacing the Front Door
During the process of removing and replacing a FRU, you might need to remove the
front door of the Sun StorEdge 6320 system. This section describes how to remove
and replace the front door of the system.
No tools are required to remove the front door.
7.2.1 Removing the Front Door
1. Open the front screen door.
2. Reach inside the door and push down on the lever attached to the spring of the
top hinge pin.
This causes the hinge pin to retract into the door.
3. Tilt the door out from the top mounting bracket and lift up slightly.
4. Remove the door and set it aside.
7.2.2 Replacing the Front Door
1. Tilt the door and insert the bottom hinge pin with the outside hole of the bottom-
left mounting bracket.
2. Reach inside the door and push down on the lever attached to the spring of the
top hinge pin.
This causes the hinge pin to retract into the door.
3. Align the top hinge pin with the outside hole of the top-left mounting bracket.
4. Release the lever.
The hinge pin extends into the mounting bracket.
7.3 Removing and Replacing a Side Panel
The tool required when removing or replacing the side panel is: