Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 17 / 176

xvii
Safety Agency Compliance
Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow when
installing a Sun Microsystems product.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
■
Follow all cautions and instructions marked on the
equipment.
■
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
■
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage
to your equipment.
Symbols
The following symbols may appear in this book:
Depending on the type of power switch your device has,
one of the following symbols may be used:
Modifications to Equipment
Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Caution
– There is risk of personal injury and
equipment damage. Follow the instructions.
Caution
– Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution
– Hazardous voltages are present. To
reduce the risk of electric shock and danger to
personal health, follow the instructions.
On
– Applies AC power to the system.
Off
- Removes AC power from the system.
Standby
– The On/Standby switch is in the
standby position.
Caution
– Do not block or cover the openings
of your Sun product. Never place a Sun
product near a radiator or heat register.
Failure to follow these guidelines can cause
overheating and affect the reliability of your
Sun product.
Caution
– The workplace-dependent noise
level defined in DIN 45 635 Part 1000 must be
70Db(A) or less.