Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 131 / 176

Chapter 9 Servicing the Expansion Cabinet 9-7
FIGURE 9-4
Removing and Replacing the Key Switch
3. Pull the key switch out of the chassis opening.
9.3.2 Replacing the Key Switch
1. Insert the key switch into the panel opening.
2. Facing the back of the key switch on the inside of the system, slide the metal clip
onto the notch of the key switch body to secure it in place (
FIGURE 9-4
).
Each screw secures a clamp on the frame that holds the cable in place.
3. Connect the key switch cable connector to the adapter-cable connector near the
back of the power sequencer (
FIGURE 9-3
).
4. Power on the system.
See the Sun StorEdge 6320 System Installation Guide for instructions about powering
on the system.
Key switch
Metal clip