Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 58 / 176

3-4 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
The default Sun StorEdge 6020 array target IDs and host names are shown in
TABLE 3-2
. This information only applies if the Sun StorEdge 6320 system is being
used in an arbitrated loop configuration. Fabric configurations do not use array
target ID information.
The Sun StorEdge 6020 array command configuration settings are given in
TABLE 3-3
.
TABLE 3-2
Default Sun StorEdge 6020 Array Target ID and Host Name
Sun StorEdge 6020 Array Target ID Host Name
array00 0, 1
array00
array01 2, 3
array01
array02 4, 5
array02
array03 6, 7
array03
array04 8, 9
array04
array10 10, 11
array10
array11 12, 13
array11
array12 14, 15
array12
array13 16, 17
array13
array14 18, 19
array14
array15 20, 21
array15
TABLE 3-3
Sun StorEdge 6020 Array Set Command Configuration Settings
Parameter Default Value
bootmode auto
bootdelay 3
sn nnnnnn
ip See TABLE 3-8
netmask 255.255.255.0
gateway 0.0.0.0
tftphost 0.0.0.0
tftpfile <NULL>
hostname <NULL> for the Sun StorEdge 6020 arrays
vendor 0301