Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 91 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-21
5.3.6.2 Modifying a Storage Pool
Use this command to modify the state of a storage pool, placing the pool storage
online or offline. The
sscs modify pool
command-line syntax is shown below.
TABLE 5-14
describes the arguments associated with the
modify pool
subcommand.
5.3.6.3 Deleting a Storage Pool
Use this command to delete a storage pool that exists in a specified Sun StorEdge
6020 array. The
sscs delete pool
command-line syntax is shown below.
-r,--raidlevel
{0 | 1 | 5}
Specifies RAID levels 0, 1, or 5.
-s,--spare {0 | 1}
Specifies if the pool contains a spare drive: specify
1
if the
pool contains a spare,
0
if it does not contain a spare.
pool
pool-name Specifies a pool-name up to 12 characters long.
# sscs modify -a
array-name
-s {online | offline} pool
pool-name
TABLE 5-14
sscs modify pool
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-s,--status online
Place the pool online
-s,--status offline
Place the pool offline
pool
pool-name Specifies a pool-name up to 12 characters long.
# sscs delete -a
array-name
pool
pool-name
TABLE 5-13 sscs create pool
Command-Line Arguments
Argument Description