Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 96 / 176

5-26 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
5.3.8.4 Removing a Volume or an Initiator Group from a Volume
Group
Use this command to remove a volume or an initiator group from a volume group.
The volume group must exist. The
sscs remove volgroup
command-line syntax
is shown below.
TABLE 5-22
describes the arguments associated with the
remove volgroup
subcommand.
5.3.8.5 Deleting a Volume Group
Use this command to delete a volume group. The volume group must exist in the
specified storage array. The
sscs delete volgroup
command-line syntax is
shown below.
TABLE 5-23
describes the arguments associated with the
delete volgroup
subcommand.
# sscs remove -a
array-name
[-i
initgroup-name |
-v
vol-name ]
volgroup
volgroup-name
TABLE 5-22
sscs remove volgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-i,--initgroup
initgroup-name
Specifies an initgroup-name up to 16 characters long.
-v,--volume
vol-name Specifies a vol-name up to 80 characters long.
volgroup
volgroup-name Specifies a volgroup-name up to 40 characters long.
# sscs delete -a
array-name
volgroup
volgroup-name
TABLE 5-23 sscs delete volgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
volgroup
volgroup-name Specifies a vol-name up to 40 characters long.