Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 92 / 176

5-22 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
TABLE 5-15
describes the arguments associated with the
delete pool
subcommand.
5.3.7 Managing Sun StorEdge 6020 Array Volumes
Use the
sscs
commands described in these subsections to create and manage
volumes on the Sun StorEdge 6020 arrays. You can create, modify, and delete
volumes.
Note – To add or remove a volume from a volume group, see “Managing Volume
Groups” on page 5-24.
5.3.7.1 Creating a Volume
Use this command to create a volume on a specified Sun StorEdge 6020 array. The
sscs create volume
command-line syntax is shown below.
TABLE 5-16
describes the arguments associated with the
create volume
subcommand.
TABLE 5-15
sscs delete pool
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
pool
pool-name Specifies a pool-name up to 12 characters long.
# sscs create -a
array-name
-p
pool-name
-s
size
gb
-P { none | readwrite | readonly} -n
lun
volume
vol-name
TABLE 5-16 sscs create volume
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-p,--pool
pool-name Specifies the storage pool-name the volume belongs to. The
pool-name can be up to 12 characters long.
-s,--size
size
gb |
size
mb
Specifies the volume size in gigabytes or megabytes. The
minimum volume size is 10 Mbytes