Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 106 / 176

6-2 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
6.2 Fault Detection
The Storage Automated Diagnostic Environment software running on the Storage
Service Processor collects and evaluates information through out-of-band
management paths to all storage devices in the Sun StorEdge 6320 system.
One way in which the Storage Service Processor can have access to the in-band
diagnostic information is to have the Storage Automated Diagnostic Environment
software running on the customer host. The information collected by the Storage
Automated Diagnostic Environment is relayed to the Storage Service Processor so
that it can aggregate the host information with the device information and send the
events to Sun service for monitoring purposes.
The Storage Automated Diagnostic Environment event and alarm notifications are
the result of configuring polling devices to be monitored. The polling results are
generated when changes to the state and status of these devices are detected.
6.2.1 Local Monitoring
The Storage Automated Diagnostic Environment software can be configured to send
alerts and events to a
mail
(1) address or even to a pager address.
If you are not interested in remote monitoring or are not concerned about security
you can choose to enable local monitoring of the Sun StorEdge 6320 system only. In
this case, you have two choices:
■
Allow the Storage Service Processor to be connected to the management LAN
which provides access to one or more host servers.
■
Provide a standalone workstation to be connected to the Storage Service Processor
as a dedicated resource to send alerts to predetermined staff 24 hours a day, 7
days a week.
If you already have a license for Sun StorEdge Remote Response service, you can
choose that method to pass alerts and event status messages to Sun. In that situation,
all Sun StorEdge 6320 systems that are grouped share the Sun StorEge Remote
Response modem interface to send alerts to Sun. The master system running Storage
Automated Diagnostic Environment software is located on the host where Sun
StorEdge Remote Response is running. All grouped Sun StorEdge 6320 systems send
all alert and event traffic over the customer’s management LAN to the Sun StorEdge
Remote Response host server for shipment to Sun. The master system running the
Storage Automated Diagnostic Environment software is optionally configured to
send email or pager messages locally.