Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 102 / 176

5-32 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
TABLE 5-28
describes the arguments associated with the
list log
subcommand.
5.3.10.8 Listing the Network Configuration
This command displays the array or system network configuration information. The
sscs list net
command-line syntax is shown below.
5.3.10.9 Listing the Notification
This command displays one or more email notification email addresses configured
for status alerts. The
sscs list notification
command-line syntax is shown
below.
TABLE 5-29
sscs list log
Command-Line Arguments
Argument Description
-s,--start
[
mmdd
]
HHMM
|
mmddHHMM
[
cc
]
yy
}
[.
SS
]
Lists all log messages starting at the date specified by the date
options. Use with the
-f
,
--finish
subcommand to specify a
date range.
-f,--finish {
[
mmdd]HHMM |
mmddHHMM[cc]yy } [.SS]
Lists all log messages ending at the date specified by the date
options. Use with the
-s
,
--start
subcommand to specify a
date range.
mmdd Specifies the month and day number. For example, 0331 for
March 31.
HHMM Specifies the hour and minute. The hour number is based on a
24-hour clock; for example, 1:30 PM is 1330.
cc Specifies the century minus one. For example, specify the
twenty-first century as 20.
yy Specifies the two-digit year number.
SS Specifies the seconds of the hour.
-t,--tail
number Lists the most recent log messages as specified by number. For
example, to list the last 100 messages, type: sscs list -t 100 log.
# sscs list net
# sscs list notification