Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 95 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-25
5.3.8.2 Adding a Volume Group
Use this command to add a storage volume to the volume group in the array. The
sscs add volgroup
command-line syntax is shown below.
TABLE 5-20
describes the arguments associated with the
add volgroup
subcommand.
5.3.8.3 Modifying a Volume Group
Use this command to associate an initiator group with a volume group and set
group access rights to volumes in the group using the modify volume group
arguments. The
sscs modify volgroup
command-line syntax is shown below.
TABLE 5-21
describes the arguments associated with the
sscs modify volgroup
command.
# sscs add -a
array-name
-v
volume-name
volgroup
volgroup-name
TABLE 5-20
sscs add volgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-v,--volume
vol-name Specifies a vol-name up to 80 characters long.
volgroup
volgroup-name Specifies a volgroup-name up to 40 characters long.
# sscs modify -a
array-name
-i
initgroup-name
-P
{
none
|
readwrite
|
readonly
}
volgroup
volgroup-name
TABLE 5-21
sscs modify volgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
-
i,--initgroup
initgroup-name
Specifies an initgroup-name up to 16 characters long.
-
P,--permissions none
| readwrite |
readonly
Specifies the user access rights to this group. The default
setting is none.
volgroup
volgroup-name Specifies a volgroup-name up to 40 characters long.