Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 94 / 176

5-24 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
TABLE 5-18
describes the arguments associated with the
delete volume
subcommand.
5.3.8 Managing Volume Groups
Use the
sscs
commands described in these subsections to manage volume groups
on the Sun StorEdge 6020 arrays. You can create, add, modify, remove, and delete
volume groups.
Note – To manage volumes, see “Managing Sun StorEdge 6020 Array Volumes” on
page 5-22.
5.3.8.1 Creating a Volume Group
Use this command to create a volume group in a disk array. After creating the
volume group, use the
create volume
subcommand to create volumes and the
add
subcommand to add volumes to the group. The
sscs create volgroup
command-line syntax is shown below.
TABLE 5-19
describes the arguments associated with the
create volgroup
subcommand.
TABLE 5-18
sscs delete volume
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
volume
vol-name Specifies a vol-name up to 80 characters long.
# sscs create -a
array-name
volgroup
volgroup-name
TABLE 5-19 sscs create volgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
volgroup
volgroup-name Specifies a volgroup-name up to 40 characters long.