Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 88 / 176

5-18 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
5.3.4.6 Powering the System
Use this command to power down the system and arrays, or just the arrays. The
sscs modify power
command-line syntax is shown below.
TABLE 5-11
describes the arguments associated with the
modify power
subcommand.
5.3.5 Managing the Sun StorEdge 6020 Arrays
Use the
sscs
commands described in the following subsection to configure the Sun
StorEdge 6020 array attributes and components.
Do not use spaces, commas, or special characters (
?
,
*
,
!
,
@
,
%
, or
&
) in the array or
initiator group names.
-h,--ssh {open | close}
Open or close the Secure Shell
tty
port on the Storage
Service Processor for secure telnet access.
-n,--ntp {open | close}
Open or close the Network Time Protocol port on the
Storage Service Processor for access to an NTP server.
-p,--patchpro {open |
close}
Open or close the port on the Storage Service Processor
to enable access to the Sun PatchPro web page,
providing updates for firmware and software updates
# sscs modify power { on | off | down }
TABLE 5-11
sscs modify power
Command-Line Arguments
Argument Description
on Specifies a power on or restore from a partial system shut
down.
off Specifies a full shut down, including the Storage Service
Processor.
down Specifies a partial system shut down; the Storage Service
Processor remains powered on and the storage arrays are
powered off.
TABLE 5-10 sscs modify firewall
Command-Line Arguments