UCH-250 Fax Server
Connecting the UCH-250
Connect the UCH-250 to your fax machine,
TracPhone V7, and vessel AC power:
Using a standard phone cable, connect
1.
your fax machine to the RJ11 port on
the UCH-250.
Using a straight-through Ethernet
2.
cable, connect the UCH-250 to the
router/switch (not the MTA) that is
connected to the TracPhone V7.
Connect the supplied power supply to
3.
the power jack on the UCH-250 then
plug it into 110V or 220V AC power.
The UCH-250 fax server is a fully managed store-and-forward system that
provides the most reliable faxing over the mini-VSAT Broadband
sm
service.
Simply hook it up between your G3 fax machine and TracPhone
®
V7!
Quick Start Guide
Status LEDs
LED
Description
Mode 1, 2, 3
Not used
Network
Connected to V7 LAN
Modem
Fax machine ready
Pending
Fax in progress
Wait
Do not disconnect
Error
Incoming fax failed
Power
Input power OK
1
2
3
1
2
3
