2
4. If trouble is experienced with this equipment for repair or
warranty information, please contact Sony Business
Information Center
S
1-800-686-7669. If the equipment is
causing harm to the telephone network, the telephone
company may request that you disconnect this equipment
until the problem is resolved.
5. This equipment cannot be used on public coin phone service
provided by the telephone company. Connection to party line
service is subject to state tariffs.
For the Customers in the United Kingdom
APPROVAL NOTICE
Rollabout processor PCS-P500P is approved for connection to
PSTN using basic rate access interface compatible with CCITT
I.420 (ISDN).
The BABT approval number for PCS-P500P is
NS/1021/5/V/606044.
Owner’s Record
The model and the serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. PCS-5100/5100P
Serial No. ______________
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
For the customers in the USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
The shielded interface cable recommended in this manual must
be used with this equipment in order to comply with the limits
for a computing device pursuant to Subpart B of Part 15 of FCC
Rules.
IMPORTANT INSTRUCTION TO USERS
1.This equipment complies with Part 68 of the FCC rules. On
the rear of this equipment is a label that contains, among
other information, the FCC registration number for this
equipment. If requested, this information must be provided to
the telephone company.
2. If this terminal equipment causes harm to the telephone
network, the telephone company will notify you in advance
that temporary discontinuance of service may be required.
But if advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be
adviced of your right to file a complaint with the FCC if you
believe it is necessary.
3. The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment meets
certain telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document (s). The
Department does not guarantee the equipment will operate to
the user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the
supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
Caution: Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
This manual focuses on using ISDN lines to conduct a
videoconference, but it also covers non-ISDN lines. If
you use ISDN lines, consult your Sony dealer for more
information.
• The ISDN service may not be available in some
areas.
Содержание PCS-5100
Страница 8: ...Features 8 Features ...
