Sony PCS-5100, Руководство по эксплуатации

Страница: 134 / 154

A-10
Appendix
Appendix
If any of the following messages appear on the monitor while you are
using the PCS-MC10 Memory Card (not supplied), take the following
steps.
Message Remedy
MEMORY CARD IS INVALID (3-digit error number) See the error message chart below.
PLEASE FORMAT MEMORY CARD Format the card. See page 4-37.
MEMORY CARD IS WRITE PROTECTED Switch off the WRITE PROTECT switch on the card. See page 4-41.
MEMORY IS FULL Use a new memory card or erase a memo. See pages 4-8, 4-9, 4-16,
4-18.
MEMORY CARD IS REMOVED Insert a memory card. See page 4-37.
Message List
Error messages (numbers) that appear when using a memory card
Error
number
Definition Remedy
001 Wrong type of card Use the PCS-MC10 Memory Card.
004 Blank No data is recorded on the card.
006 Memory is full. Erase unwanted data or use a new card.
007 Use after formatting. See page 4-37.
008 Use after formatting. See page 4-37.
009 Use after formatting. See page 4-37.
020 You have inserted the PCS-UC500 Upgrade Card or PCS-MC10 Memory Card
that has already been used on another PCS-5100/5100P unit.
021 No card Install the appropriate card. See page 4-37.
022 Install the appropriate card. See page 4-37.
023 You have installed the wrong type of memory card.
130 Writing error Try writing again or use a new card.