Siemens ADVIA 2400 Скачать руководство пользователя страница 84

Страница: 84 / 200

ADVIA 2400 Operator’s Guide

Using the Sample Log

At the Menu Panel, select

Request

, then select

Sample Log

Perform any of the following tasks at this window:
a.

view the sample log entries

search the sample log

delete a specific sample log entry

delete all sample log entries

print a list of the sample log entries

export the sample log entries

Close the window.

Viewing the sample log entries

In the list box, select the file containing the sample log entries you want displayed.
The file for the current day is selected automatically.

Select the types of sample entries you want to display:
a.

Select

ALL

to view all sample entries.

Select

Routine/Ctl

to view patient and control sample entries.

Select

Routine Only

to view patient sample entries.

The following information is provided for each sample log entry:

Asp Date and Time

External

Type

STT SampleID

Rerun

CTT Description

Results

To view entries for recently aspirated samples, select

Update

Searching the sample log

Select the search condition(s) you want and enter the applicable information:

Sample ID

: Enter the sample identification. Search is case sensitive (C0101 is not the

same as c0101).

Asp. Date

: Enter the aspiration date using the format YYYYMMDD where YYYY

is the year (2006), MM is the month (01 to 12), and DD is the day (01 to 31).

Asp. Time

: Enter the aspiration time using the format HH:MM:SS where HH is the

hour (00 to 24), MM are the minutes (00 to 60), and SS are the seconds (00 to 60).
You can enter an approximate aspiration time (for example, 14:00:00), but the time
entry must be complete (that is, 14:00 causes an error, it should be 14:00:00).

Select

Execute

Содержание ADVIA 2400









































































































































































































Результаты поиска

Содержание ADVIA 2400

Отзывы:

Siemens ADVIA 2400, Руководство оператора, Страница: 84 / 200

Результаты поиска

Содержание ADVIA 2400

Отзывы: