manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 66 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 66

66 

 

ADVIA 2400 Operator’s Guide

 

 

 

Figure 2-1. Power panel at Startup 

The power indicator (

2

) is on, and the Start (

4

) and Ready (

3

) indicators start flashing 

when the communication to the PC is established. 

4.

 

At the Startup window, do the following: 
a.

 

In the Please enter password box, enter the user password.  

User passwords assigned in the User Code Settings window are not case 
sensitive. 

b.

 

Select New Start or Re-start, then select 

OK

. 

After a few minutes, the Menu Panel and the Operation Panel open. 

  CAUTION 

Make sure that all probes and mixers are free to move without obstruction and that all 

analyzer covers are in place to avoid possible injury and damage to the analyzer 

5.

 

When the Start and the Ready indicators are off, and the Initialize button on the 
Operation Panel activates (turns black), select 

Initialize

.  

6.

 

At the Windows desktop, double-select the rack handler icon.  

7.

 

Log on as 

supervisor

 or 

tech_manager

, if required. 

Performing a system-assisted startup (Start set) 

1.

 

Verify that sufficient system reagents and wash solutions are available for the startup 
you want to run. 

2.

 

At the Menu Panel, select 

Maint

. then select 

System Startup/Shutdown Settings

. 

3.

 

In the Mode set list, select 

Start set

. 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов