manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 112 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 112

112 

 

ADVIA 2400 Operator’s Guide

 

Inspecting and cleaning the probe wash cups 

Materials required: 

•    Phillips screwdriver 
•   Lint-free towel 
•   Deionized water 

Time: 5 minutes 
Analyzer mode: READY 

BIOHAZARD 

Wear personal protective equipment.
Use universal precautions. 

NOTE:

 Keep the probe wash cups clean to ensure proper cleaning of the probe.

 

Clean any wash cups that fail the daily visual inspection for cleanliness. 

 

1) 

Dilution Probe Wash Port 2 (LAS) 

2) 

Dilution Probe Wash Port 1 

3) 

Sample Probe Wash Port 

4) 

Reagent Probe 2 Wash Port 

5) 

Reagent Probe 1 Wash Port

 

  

Figure 5-8. Wash ports 

1.

 

Visually inspect each probe wash cup for cleanliness.  
If any of the probe wash cups appear dirty, clean them as described in the following 
steps. 

2.

 

At the Menu Panel, select 

Maint

, then select 

User Maintenance

. 

3.

 

At the User Maintenance window area labeled Probe posi.adjust., select 

Position 

adjust start

. 

All probes move to the cuvette positions, allowing access to the wash ports. The 
operating mode display on the Operation

 

panel indicates that the instrument is in the 

WAIT state. For additional information, see the User Maintenance window in the 
online Operators Guide. 

4.

 

Pour deionized water into the wash cups and overflow sensor unit, then clean and dry 
these areas with lint-free towels. 

  CAUTION 

Do not apply excessive force while cleaning the overflow sensor, to avoid damaging 

it. If an overflow error message appears, there is probably water on the sensor. Dry 
the sensor.  

To clear the alarm message, on the Operation Panel, select the alarm

 

  icon. 

5.

 

At the Operation Panel,

 

select 

Initialize

 

to return the system to READY mode. 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов