manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 2 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 2

 

 

 

 

 

 

The ADVIA

®

 2400 Chemistry system is for

 in vitro

 diagnostic use. 

The information in this guide was correct at the time of release. However,  
Siemens Healthcare Diagnostics continues to improve products and reserves the right to 
change specifications, equipment, and maintenance procedures at any time without 
notice. 

If the system is used in a manner not specified by Siemens, the protection provided by 
the equipment may be impaired. Observe all warning and hazard statements. 

The ADVIA

 

Chemistry system is manufactured in Japan for 

Siemens. 

T

HE 

U

NIVERSAL 

R

ACK 

H

ANDLING 

S

YSTEM IS MANUFACTURED IN 

G

ERMANY FOR 

 

S

IEMENS

. 

O

RIGIN

:

 

J

APAN

 

 

 

Copyright and trademarks 

ADVIA Centaur

 

and

 

ADVIA are trademarks of Siemens Healthcare Diagnostics. 

Acrobat is a trademark of Adobe Systems Incorporated, San Jose, CA. 

Clorox is a trademark of The Clorox Company, Oakland, CA. 

Windows is a trademark of Microsoft Corporation. 

 

© 2009 Siemens Healthcare Diagnostics Inc. All rights reserved. 

No part of this manual or the products it describes may be reproduced by any means or 
in any form without prior consent in writing from Siemens. 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов