manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 65 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 65

Operating the System 

65 

2 Operating the System 

Start the System 

Logging on 

There are 4 access levels to the system software: 

Level Password 

Comment 

user 

no 

Intended for routine operation 

supervisor 

yes 

Access to some system setup and advanced 

maintenance features 

tech_manager 

yes 

Access to most system setup and advanced 

maintenance features  
You have to contact your technical service provider 

or distributor in order to change the default settings 

on these windows. 

service 

yes 

Access for Siemens service personnel 

You are automatically logged on at the user level during startup. No operator is required. 

If you log on at the supervisor or tech_manager levels, when done, you should log on to 
the user level (no password required). 

Starting the system 

1.

 

After the power is applied and the Windows operating system is loaded, the ADVIA 
Chemistry system Startup window displays. 

2.

 

Turn on the optional universal rack handler:  
a.

 

For the rack handler, set the control panel Standby/On switch to | (ON). 
The ready indicator is green. 

b.

 

For the universal rack handler, set the display panel Ready/Standby switch to 
READY. 
The power indicator is green. 

3.

 

At the analyzer power panel, set the Operate/Standby switch (

1

) to 

Operate

. 

 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов