manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 44 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 44

44 

 

ADVIA 2400 Operator’s Guide

 

Print Report window* 

Use this window to print sample data using report layouts created in the Print Format 
Settings window. 

This window is only available from the supervisor logon. To print reports, go to the 
Review/Edit window and using the Print Report button. 

  CAUTION 

Tests on the Print Report form must be in the same order as they appear in the System 
Test List window, to avoid incorrect positioning of results on the print report. Do not 
modify the order of the test names on the System Test List window after the initial 
setup. Any repositioning of test names on the System Test List window could result 
in already run being associated with the wrong test name. 

Test Select window* 

You select tests in this window for patient and control sample analysis and calibrations.  

Use this window for the following tasks: 

•

 

Disable ("down") a test.  

For example, a test may be downloaded from a host system to analyzers in your lab, 
but that test is not run on the ADVIA

 

Chemistry System. 

•

 

To "down" a test, select one of the Test Select radio buttons, and deselect it from the 
corresponding test table. 

NOTE: 

You can remove tests for calibrators and controls from the current run using the 

Calibration

 and 

Control

 windows, but they stay selected for subsequent runs.

 

Cup/Tube Assign window* 

Use this window to assign container types to each of the 84 positions in the STT sample 
tray. For the current analysis, you can override the settings in the Temp cup/tube select 
window. 

Test Utilization Statistics window 

Use this window to monitor the test utilization against Patient, Calibrations, and Controls. 

NOTE: 

All tests defined on the system are displayed.

 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов