manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 150 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 150

150 

 

ADVIA 2400 Operator’s Guide

 

Priming the system 

1.

 

At the Menu Panel, select 

Maint.

, then select 

User maint

. (For additional details, 

refer to Using the User Maintenance window.). 

2.

 

At the User Maintenance window, in the Position Probes for Routine Cleaning area, 
select 

Start

, then select 

Yes

 when prompted. 

3.

 

Ensure that the probe is perpendicular to the arm and centered over the cuvette.  

4.

 

If not centered, call your local technical support provider or distributor. 

5.

 

At the Operation Panel, select 

Initialize

 to return the probes back to home (over the 

wash cups). 

6.

 

At the Operation Panel, select 

Prime

, 

PRIME 2

, and then 

Execute

 to ensure proper 

water flow through the probe. 

NOTE:

 Make sure that no water is leaking from the joint connector (

4

). 

Replenishing the RRV (reaction) bath oil bottle 

Materials required: 

•   RRV (reaction) bath oil  

(REF 09323099, PN B01-4180-01) 

Time: 10 minutes 
Analyzer mode: READY 

BIOHAZARD 

Wear personal protective 
equipment. 
Use universal precautions. 

 

 

 

 

1) 

ISE

 

buffer bottle  

2) 

RRV (Reaction) bath oil bottle 

3) 

Isotonic saline diluent bottle 

4) 

Cuvette detergent bottle 

5) 

Cell conditioner bottle 

Figure 5-33. RRV bath oil bottle 

  CAUTION 

Do

 not attempt to clean the RRV bath oil bottle (

1

) with water; RRV bath oil and 

water do not mix. 

1.

 

Unscrew the filter cap (

3

) at the front of the RRV bath oil bottle (

1

), then pull up the 

tube with the filter. 

2.

 

Disconnect the RRV bath oil bottle level sensor connector (

2

), then turn the 

connector counter-clockwise and pull it out. 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов