manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 63 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 63

System Overview 

63 

7.

 

Select 

Glossary

. A glossary of relevant terms displays. Select any word in the list to 

display its definition in the bottom frame. 

8.

 

Select the 

Print

 tab to print information displayed in the content frame. To print the 

contents of a popup, right-select in the popup and select Print from the menu. If a 
large image is partially displayed in the content frame, you must enlarge the viewer 
to display the full image before it can be printed properly. 

Viewing the content 

Help topics display in a content frame. Some topics, including reference documents and 
images, appear in a second window. Navigation from these windows, including 
minimizing, maximizing and closing, use standard Windows conventions. 

Some popups display partially outside the viewer content frame. In this case, to view the 
entire popup, select and drag the lower-right corner of the viewer window to enlarge it 
and view the complete popup. 

Topics have hyperlinks (displayed in teal) or shaded hotspots embedded in text or 
illustrations that link to displays of related or more detailed information. 

Select teal text to activate hyperlinks.  

The hyperlink is bold when the mouse pointer is over it. Hyperlinks using a cascading 
menu point to additional links. Graphics may have hotspots (shaded green or tabs) that 
are more detail information, such as a table of values. 

1.

 

Select the back arrow     on the toolbar to return to the previously viewed topic or 

the forward arrow     to navigate to the topic that was displayed prior to going back. 

2.

 

To make a popup go away, select outside the popup window. 

3.

 

Select the viewer back arrow to return to the main content area from a reference 
document (such as PDF files). 

NOTE: 

Your help viewer can resize, but it is recommended that the viewer stay in its 

default size. 

 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов