manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 36 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 36

36 

 

ADVIA 2400 Operator’s Guide

 

Software Overview 

This section of the manual describes the software windows available to configure and run 
your chemistry system. It does not explain how to use these windows. For detailed 
information on the use of the windows, refer to the online Operator’s Guide. 

The software controls most of the functions run by the chemistry system. The software, 
which runs under the Windows operating system, starts automatically when you turn on 
the PC. 

You start the software from the Startup window, and stop it from the Menu Panel. 

After the software has started, the Menu Panel and the Operation Panel appear at the top 
of your screen. 

As long as the software is running, these windows remain in the same position (unlike 
most Windows XP windows). Use the top display option (Systems(s)) to allow other 
windows to display on top of the Menu Panel and Operation Panel. 

Startup window 

The Startup window is the first window you see when you turn on the PC and the last 
window when you stop the system. 

Perform any of the following tasks at this window: 

•

 

new start 

•

 

restart 

•

 

back up and restore system files 

•

 

set or clear the system data prior to startup. 

•

 

shut down and restart Windows  

1.

 

At the Menu Panel, select 

System (s)

, then select 

Exit (X)

. 

2.

 

Select 

Yes

 when prompted, then select 

Yes

 when prompted again.  

The 

Startup

 window appears. 

If you select 

Cancel

, the Startup window closes, leaving you in Windows (you are not 

able to perform the above functions). To open the Startup window again, restart 
Windows. 

Operation Panel  

This window opens after you start the system software from the Startup window.  

Use this window for the following tasks: 

•

 

perform routine tasks on the Chemistry system 

•

 

check the system status and alarm messages 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов