manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 194 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 194

 

Appendix E – Symbols 

Explanations of symbols associated with the ADVIA 2400 
system 

Warning and caution symbols 

 

 

 

These symbols are used for both caution and warning. 

WARNING

 indicates the risk of personal injury or 

loss of life. 

CAUTION

 indicates the possibility of damage to or 

destruction of equipment. 

  

CAUTION

 

When this symbol appears on the system without 

additional information, you must consult the 

instructions for use. 

 

This symbol indicates a moving component that can 

cause injury. 

 

This symbol alerts you to a potential electrical hazard.

 

This symbol alerts you to the risk of exposure to 

lasers. 

The onboard sampler is equipped with a laser barcode 

reader. When covers are opened, there is a risk of 

radiation exposure. Do not stare into the beam. 

 

This symbol alerts you to a potential biohazard. 
Biohazard labels are also placed on the sample and 

dilution probes, which are exposed to the sample 

during the analysis. 

 

This symbol indicates the presence of a part emitting 

high temperature. 

Caution -   

Laser radiation when open and interlocks defeated. Do not stare into beam 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов