manualshive.com logo in svg

Siemens ADVIA 2400, Руководство оператора, Страница: 125 / 200

Поделиться
Скачать
Siemens ADVIA 2400 Скачать руководство пользователя страница 125

Maintenance 

125 

Abnormal cuvettes 

A list containing abnormal cuvettes is printed as part of the cell blank. The list contains 
marks indicating abnormality. Cuvettes on the list are not used for analysis. Abnormal 
cuvettes have the following characteristics: 

•

 

Cuvettes exceeding the cell standard value (set in the System Parameters System 
window) are marked "H" or "L." 

•

 

Cuvettes exceeding the cell breakup limit value (set in the System Parameters 
Settings window) are marked "N." 

•

 

Cuvettes exceeding the skip absorbance value (set in the System Parameters Settings 
window) are skipped (marked E), and therefore not used for analysis. 

•

 

Cuvettes exceeding the lamp energy voltage limits are skipped (marked U or D), and 
therefore not used for analysis. 

•

 

Abnormal cuvettes remain registered as abnormal until a future measurement 
determines that they can be used. 

Reference value 

The reference value (the average value of the measurements of all cuvettes) remains the 
same until the next measurement. 

Cleaning the analyzer and rack handler exterior panels 

Materials required: 

•   Lint-free towel 
•   10% solution of bleach (5% sodium 

hypochlorite) and water 

Time: 10 minutes 
Analyzer mode: READY 

BIOHAZARD 

Wear personal protective equipment.
Use universal precautions. 

1.

 

Put the analyzer and rack handler (if applicable) in Standby mode. 

2.

 

Turn off the 30-A power switch at the back of the system. 

  WARNING 

Turn off the main power switch at the back of the analyzer, to avoid catching the 

toweling in the cooling fans. 

3.

 

Close the analyzer cover. 

4.

 

Prepare a 10% solution of bleach and DI water. 

5.

 

Dampen lint-free towels with the solution and wipe the following exterior surfaces: 

•

 

top cover 

•

 

side panels 

•

 

front panel  

•

 

bear panel using deionized water, wipe the exteriors again. 

6.

 

Turn on the 30-A power switch at the back of the system. 

7.

 

Return the system to the Operating mode and the rack handler to the ON mode (if 
applicable). 

Содержание ADVIA 2400









































































































































































































Отзывы:

Нет отзывов