Siemens ADVIA 2400, Руководство оператора, Страница: 140 / 200

140 ADVIA 2400 Operator’s Guide
CAUTION
To assist with removal as well as to avoid crimping these thin filter hoses, remove
only 3 or 4 hoses from the water bottle at a time.
6. First unfasten the filter holder from the end of each tube, and then remove the filter.
7. To clean the 10R filter:
a.
Place the filter in a beaker filled with a freshly made 10% solution of household
bleach and water.
b. After 30 minutes, remove the filter and rinse it with deionized water and replace
onto the filters.
CAUTION
Ensure that the filters are properly positioned with the filter holder to avoid filter
shift.
8. Using a lint-free towel soaked in 5% bleach solution, clean the outside surfaces of the
filter holder and hose.
9. Insert the silicon filter hose into the water bottle.
10. Insert the ten Teflon filter hoses in the tank, 3 or 4 at a time.
11. Prime the lines:
a.
At the Operation Panel, select the
Prime
button.
b. In the PRIME Set dialog box, select
PRIME 2
and type
10
or more for the
number of times in all fields.
c. Select
Execute
.
Replacing the reaction and dilution cuvettes
Materials required:
• 13 sets of reaction cuvettes (sample
cell RRV, single cuvette set,
REF 05024992, PN 073-0023-02)
• 6 sets of dilution cuvettes (sample cell
DTT, single cuvette set,
REF 05049669, PN 073-0022-01)
Time: 20 minutes
Analyzer mode: OFF
BIOHAZARD
Wear personal protective
equipment.
Use universal precautions.
Replace the 20 sets of reaction (RRV) cuvettes and 6 sets of dilution (DTT) cuvettes once
every four months.